In many applications gas analysis is key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results.
The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas.
However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.
Buehler 90 090 42 Sample gas probe
Flange seal ANSI3” 150 lbs
Stok kodu:
90 090 42
Kategoriler: Örnek Gaz Probları
Açıklama
Ek bilgi
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to info@avat-industrial.com and specify the required positions and company details.
İlgili ürünler
Buehler BA 2000 Oxygen Flue Gas Analyser
- Fast response time
- Tool-less filter change
- Easy handling
- Flue gas temperatures up to 1600 °C / 2912 °F
- Durable ZrO2measuring cell
- Display with O2measurements
- 4-20 mA output signal
- Ambient temperature -20 to +70 °C respectively 4 to 158 °F
- No reference glass required
- No test gas required
- No gas conditioning required
- Calibration with instrument air
Buehler GAS 222.11 Ex2 Sample gas probe
- Versions with Atex and IECEx approval
- Unheated probe with shut-off valve and/or inlet filter
- The filter element can easily be removed by turning the handle 90°
- For dust loads up to 2 g/m³, non-condensable gases.
- Combined with inlet filter up to 10 g/m³ and higher
- The probe is suitable for use in explosive areas
Buehler GAS 222.20 Ex2 Sample gas probe
- Versions with Atex and IECEx approval
- Heated probe with outlet filter and weather hood
- The outlet filter can easily be removed by turning the handle 90°
- The probe body and the area around the screw connection for the heated sample gas line are completely isolated
- Heater self-regulating to approx. 130 °C/ 266 °F (T3)/70 °C/158 °F (T4) with low temperature alarm
- For dust loads up to 2 g/m³
- This probe is suitable for use in explosive areas