Driven Membrane Solenoid Valves – Direct Action
The driven membrane Solenoid Valves are suitable to be used were the service pressure may be zero. This includes gravity filling installations of tanks and other applications with minimum pressure. Shut-off valves for Water, Air, Oil and neutral non-corrosive Fluids.
General Information:
Driven membrane solenoid valve
Function 2-Way NC
Protection IP 65 with connector
Standard Voltage 24 VDC, 24V,110V,230V AC
Options:
Special Voltage
Insulation Class Coils H (180 °C)
Electrical Connector IP 65
Electrical Connector IP 65 c/w LED and Varistor
Waterproof Coils IP 67, Atex II 2 GD
Açıklama
Ek bilgi
Brand |
---|
GET A PRICE
To receive a proposal, please send your application to info@avat-industrial.com and specify the required positions and company details.
Specification
Valve Body: Die-Cast brass
Latch Disc: NBR-FKM-EPDM
Pass-through Diameter: From 15 to 25 mm
Rate Value Kvs: From 65 to 160 l/min.
Service Pressure: 0 - 16 bar (depending on the type of coil)
Max. Pressure of Use: 50 bar
Coil Insulation Class: class F (155 °C)
Insert: 100 % continuous insert
Threaded Fittings: Bevel Threaded G 3/8" - 1"
Viscosity of the Fluid: 76 Cst. max.
Temperatures of the Fluid: From -10 °C to + 140 °C depending on the type of vds PDF)
Ambient Temperature: From - 10 °C to + 50 °C